Become a Member

Get access to more than 30 brands, premium video, exclusive content, events, mapping, and more.

Already have an account? Sign In

Become a Member

Get access to more than 30 brands, premium video, exclusive content, events, mapping, and more.

Already have an account? Sign In



Ask A Gear Guru: How In The #$*& Do I Put On A Triathlon Wetsuit?

Just like anything, there are two ways to put on a triathlon wetsuit—the right way and the wrong way. Any pro will tell you that putting on a cheap wetsuit correctly is better than putting on an expensive one the wrong way.

For access to all of our training, gear, and race coverage, plus exclusive training plans, FinisherPix photos, event discounts, and GPS apps, sign up for Outside+.

Triathlon is hard. That’s a big part of why so many of us choose to tackle “The Beast With Three Heads That All Somehow Bite You And Each Other At The Same Time, All The Time.” (Yes, that’s a term I just came up with, and I doubt it’ll catch on, but here we are.) With so many moving parts in this sport and so many parts that help us move, having to struggle with your wetsuit on race day shouldn’t be one of them. That said, taking the time to put a triathlon wetsuit on right, making some modifications, and using a few handy little products can go a long way to swim leg success. Secret insider tip: You’ll actually be faster and less fatigued wearing inexpensive neoprene that’s properly “suited” than a $1000 wetsuit that isn’t on right.

Read on for how to get it on—your wetsuit, that is.

RELATED – Ask A Gear Guru: How Do I Prevent Chafing In The Swim?

New Neo Needs To Stretch

This is a classic mistake that new triathletes make when they’re trying on a wetsuit for the first time. Yes, your suit should be snug, not quite to the point of choking you, but pretty close. The neck needs to be tight so water doesn’t come flowing in—which would turn you into a big flopping anchorperson. The good news is neoprene actually stretches out after about an hour or so in water, when it goes in for the first time. Some triathletes soak their new wetsuit in the bathtub; some just slap it on and swim. Either way, expect a little fit forgiveness and stretching after that first dunking, and do not wear your new wetsuit for the first time on race morning. It won’t feel great.

Old Neo Can (Sometimes) Be Brought Back From The Dead

If you’ve got an old wetsuit—think years old—sometimes they can dry out and start to “rot” a bit if you store them in a hot dry place. If you try to pull it on, there’s a chance that dryness can turn into tears that are either tough or impossible to repair. While some wetsuits once they reach this state are toast, your best bet is to slack the suit like you would wilty lettuce and attempt to “rehydrate” the neoprene cells. There’s no guarantee your wetsuit will be as good as new, but it might be able to hang on for another season.

Do A Little Pre-Wetsuit Prepwork

Before you put on your triathlon wetsuit, there are a few key tips that’ll help:

  1. Trim your nails – The easiest way to ruin a tri wetsuit is hands-down tearing it with long fingernails. If trimming your nails isn’t a fashion/lifestyle choice you’re willing to adopt, if you have an expensive (read: delicate) wetsuit, you may want to try using thin running gloves.
  2. Put on some socks – One of the toughest parts of putting on a triathlon wetsuit is getting your foot through the legs—particularly the heel if you have big feet. This can be made much easier by putting on a pair of thin, dry socks. 
  3. Dry off – Putting on a wetsuit while wet or sweaty is super hard. Be sure you dry off as much as you can or let yourself cool down, if possible, before putting it on.
  4. Put on some lube – If you don’t have socks, put lube on your heel, but also put it on your ankles and wrists for both getting on the wetsuit and taking it off. Put lube on your lats and neck (for sure) to help prevent chafing, and once your socks are off and the suit is on, put lube on your heel to help with removal.
  5. (Optional) Put the wetsuit inside out – Some people love the inside-out-and-up method where they roll the wetsuit up and onto their bodies from the bottom. This is a great way to prevent fingernail tears when you’re first putting it on, but you’ll still need to pull on the outside to adjust it once it’s on—we’ll get to that below.

How to Put on a Triathlon Wetsuit: A Step-By-Step Guide

Once you’ve done your prepwork, follow these steps to get the wetsuit on—we’ll get to adjustments down below:

  1. Sit down, get your socked foot through one leg hole, and pull that neoprene over your ankle, higher than you think it should go. Do the same with the other leg
  2. Carefully pull any bunched neoprene up over your leg making it tight, using the inside of the suit to grip. Don’t pull on the outside, as it can easily tear.
  3. Once it’s up to your hips, pull the crotch section high, higher than is actually comfortable. This could mean “borrowing” some neoprene from the ankles and pulling more up over your legs. 

IMPORTANT NOTE: It should fit very very tight in your crotch. If it’s not, the suit will pull your whole body down once zipped up and negatively affect your posture and your arms’ freedom of motion.

  1. Pull the upper body up and get your hands through the arm holes, here again you should do as much pulling as you can on the inside of the suit—which is very durable.
  2. Once your arms are in, pull the material tight towards your shoulders, and don’t worry about arm length, this isn’t a dress suit. The neoprene from the arms should be so high into your armpit, it nearly bunches up (but not quite). Much like your crotch, it should rest almost uncomfortably high.
  3. Give one last pull of material (carefully) from the hips up, snugging your crotch even more—like pulling up a pair of pants too high—and taking that material upwards along your torso and towards your shoulders. Give a big pull (carefully, again) at your chest up toward your neck, getting that neckline as high as you can.
  4. Pinch your shoulder blades back, grab the string, and zip from the bottom up. If it’s too tough, pull up the material from the bottom of the zipper, on your lower back, just above your butt.
  5. Once again, check to make sure the neoprene is pulled into the “crotch” of your armpit.


Once the suit is on, you need to make sure it’s on correctly. Don’t skip these steps! A few things to look for after you’ve put on your triathlon wetsuit:

  • Starting at the bottom, see if you can gather more material from the ankles up. It doesn’t matter if the wetsuit looks like pants that are too short. Pull bit by bit to see if you can gather up more neoprene.
  • From the hips, also try to bring more neoprene upwards along your torso on the front, back, and sides. You want the neckline to be high—where it’ll choke you less—not pulling down toward your chest.
  • Arch your back, reach, behind you, grab the area that’s zipped, and pull while bending forward a bit. This will help bring more material up toward the neck and shoulders.
  • Grab the neoprene on each shoulder blade with the opposite hand, and pull that up and forward, over the top of your shoulders.

All of these motions are meant to give you a straight, not curved, posture and to give as much range of motion to your shoulders. Even an expensive suit not put on right will see you either hunching forward or arching backward due to pulling neoprene, and the misplaced neoprene will cause fatigue in your shoulders due to neoprene pulling from the wrists or torso.

RELATED: The Evolution of the Swimming Wetsuit

Modifications To The Wetsuit

If you’re struggling to get your suit on or off, there are a few things you can do to help:

  • Cut the ankles – The higher you cut the ankles, the easier the suit will be to get on and off, but you’ll also lose a little bit of coverage and floatation. Some suits may also fray a little bit on seams, but most won’t.
  • Add a longer lanyard – Extra string on the zipper means you’ll be able to find it faster and grab it easier when putting on or taking off your wetsuit.
  • Lube it up – Don’t just put lube on your body at those key spots, but use a stick of lube (like Body Glide, for example) to roll lube onto the inside of the wetsuit at the ankles, wrists, neck, armpits, or anywhere else you chafe, like your chest. It’ll stick in the fabric and add a layer of protection. For more on eliminating wetsuit chafing, check out our story here.

More Expensive Triathlon Wetsuits Are Easier To Put On/Take Off

There’s a reason more expensive wetsuits cost more and are more desirable, and it has nothing to do with warmth (despite what people may think). More expensive wetsuits have thinner neoprene that stretches more and is sometimes impregnated with air to aid in buoyancy while remaining lightweight and flexible. The good news is that flexy triathlon wetsuit neoprene is often much, much easier to put on and take off—in addition to giving you a greater range of motion in the shoulders. Like we’ve said before, however, they’re very very delicate and require you to be careful as you pull it on.

Looking for some new neoprene? Check out our extensive guide to the latest wetsuits for men and women. 

RELATED – Wetsuit Repair: The Complete DIY Guide